Audio Technica System ATW-1101/H Digital headset mic Wireless System


Audio Technica System 10 ATW 1101/L Digital Lavalier Wireless System

Audio-Technica’s ATW-1101/H System 10 digital high-fidelity wireless system is designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Featuring stackable, contemporary styling, System 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and UniPak® body-pack transmitters designed for use with lavalier, headworn and instrument microphones as well as electric guitars. Each configuration includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights.

Audio-Technica ATW-1101/H Includes:

ATW-R1100 receiver
ATW-T1001 UniPak® transmitter

PRO8HEcW Headworn Microphone

Audio-Technica ATW-1101/H Features:

Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
2.4 GHz range – completely free from TV interference
Three levels of diversity assurance: frequency, time, and space
Automatic frequency selection for seamless, interference-free operation
Extremely easy operation with instantaneous channel selection, sync, and set-up
State-of-the-art digital receiver for reliable performance
Balanced XLR and unbalanced 1/4” output jacks with level control

Audio-Technica ATW-1101/H Specifications:

Overall System:
Operating Frequencies: 2.4 GHz ISM band
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical Operating Range: 30 m (100') typical Open range environment with no interfering signals Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Frequency Response: 20 Hz to 20 kHz Depending on microphone type Audio Sampling: 24-bit / 48 kHz ATW-R110 Receiver: Receiving System: Diversity (frequency/time/space) Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3mm), unbalanced: +6 dBV Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions (WxHxD): 7.48" x 1.82" x 5.06" (190 x 46.2 x 128.5 mm) Net Weight: 290 g (10.2 oz.) Accessory Included: Power supply ATW-T1001 UniPak® Transmitter: RF Output Power: 10 mW Spurious Emissions: Following federal and national regulations Input Connection: Four-pin Locking Connector: Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries (not included): Two 1.5V AA Battery Life: >7 hours (alkaline
Depending on battery type and use pattern
Dimensions (WxHxD): 2.76″ x 4.21″ x 0.98″ (70.2 x 107 x 24.9 mm)
Net Weight (without batteries): 100 g (3.5 oz)
PRO8HEcW Headworn Microphone:
Element: Dynamic
Polar Pattern: Hypercardioid
Cable: 55″ (1.4 m), terminated for use with Audio-Technica UniPak® body-pack transmitters